Fujitsu SPARC Enterprise T2000, Service Manual, Page: 159 / 174

Chapter 6 Adding New Components and Devices 6-7
7. Perform the procedures described in Section 5.1, “Common Procedures for Parts
Replacement” on page 5-1 .
6.2.3 PCI Express or PCI-X Card Guidelines
Follow these guidelines and
FIGURE 6-4
to plan your configuration:
■
The server provides the following PCI capabilities:
■
3 PCI-Express (PCI-E) slots for low-profile cards (supports lane widths of x1,
x2, x4, and x8)
■
2 PCI-X slots for low-profile cards
Note –
There are a variety of PCI-X and PCI-Express cards on the market. Read the
product documentation for your device for additional installation requirements and
instructions that are not covered here.
FIGURE 6-4
Location of PCI-Express and PCI-X Card Slots
6.2.4 Adding a PCI-Express or PCI-X Card
1. Perform all of the procedures in
Section 5.1, “Common Procedures for Parts
Replacement” on page 5-1 .
PCI-E slots 0, 1, 2
PCI-X slots 0, 1