Fujitsu SPARC Enterprise T2000, Installation Manual, Page: 72 / 88

46 SPARC Enterprise T2000 Server Installation Guide • April 2007
To understand the various devices and their path names as represented in the
OpenBoot device tree, refer to
TABLE 3-1
. The table identifies each of the devices, their
full path name and their location or NAC name used to identify their physical
location.
Booting the Solaris Operating System
The Solaris OS is preinstalled on SPARC Enterprise T2000 server on the disk in slot
0. The Solaris OS is not configured (that is, the
sys-unconfig
command was run in
the factory). If you boot the system from this disk, you will be prompted to configure
the Solaris OS for your environment.
▼
To Boot the Solaris Operating System
1. At the
ok
prompt, boot from the disk that contains the Solaris OS.
If you know which disk to boot from, skip Step a and perform Step 2 .
TABLE 3-1
Map of Devices, OpenBoot Path Names, and Locations
OpenBoot Device Path Name Device Location Name
/pci@780
Fire IO Bridge Bus A IOBD/PCIEa
/pci@780/pci@0
PLX 8532 PCI-E Switch A (U0901) IOBD/PCI-SWITCH0
/pci@780/pci@0/pci@1
Intel Ophir GBE Chip (U2401) IOBD/GBE0
/pci@780/pci@0/pci@8
PCI-E Slot 0 (J2100) PCIE0
/pci@780/pci@0/pci@9
LSI 1064-E SAS Controller (U3401) IOBD/SASHBA
/pci@7c0
Fire IO Bridge Bus B IOBD/PCIEb
/pci@7c0/pci@0
PLX 8532 PCI-E Switch B (U1501) IOBD/PCI-SWITCH1
/pci@7c0/pci@0/pci@2
Intel Ophir GBE Chip (U2601) IOBD/GBE1
/pci@7c0/pci@0/pci@1
Intel 41210 Bridge Chip (U2901) IOBD/PCI-BRIDGE
/pci@7c0/pci@0/pci@1/pci@0,2
PCI-X Slot 0 (J3301) PCIX0 (J3301)
/pci@7c0/pci@0/pci@1/pci@0,2
PCI-X Slot 1 (J3201) PCIX1 (J3201)
/pci@7c0/pci@0/pci@1/pci@0
ULI Southbridge Chip (U3702) IOBD/PCIX-IO
/pci@7c0/pci@0/pci@8
PCI-E Slot 1 (J2202) PCIE1 (J2202)
/pci@7c0/pci@0/pci@9
PCI-E Slot 2 (J2201) PCIE1 (J2201)