Fujitsu SPARC Enterprise T2000, Installation Manual, Page: 53 / 88

Chapter 2 Installing the Server 27
FIGURE 2-16
Ethernet Network Connections
1. Connect a Category 5 cable from your network switch or hub to Ethernet Port 0
(NET0) on the rear of the chassis.
2. As needed, connect Category 5 cables from your network switch or hub to the
remaining Ethernet ports (NET1, NET2, NET3).
▼
To Connect the SC Serial Management Port
The SC serial management port is marked SER MGT. It is the leftmost RJ-45 port on
the rear of the chassis (
FIGURE 2-17
).
FIGURE 2-17
System Controller Serial Connection
NET0
NET1
NET2
NET3
SER MGT