Fujitsu SPARC Enterprise T2000, Administration Manual, Page: 51 / 98

Chapter 2 Managing RAS Features and System Firmware 29
▼
To Log In To ALOM CMT
1. If you are logged in to the system console, type
#.
(Pound-Period) to get to the
sc>
prompt.
Press the Pound key, followed by the Period key. Then press the Return key.
2. At the ALOM CMT login prompt, enter the login name and press Return.
The default login name is
admin
.
3. At the password prompt, enter the password and press Return twice to get to the
sc>
prompt.
Note –
There is no default password. You must assign a password during initial
system configuration. For more information, refer to the installation guide and
ALOM CMT guide for your server.
Caution –
In order to provide optimum system security, best practice is to change
the default system login name and password during initial setup.
Using the ALOM CMT system controller, you can monitor the system, turn the
Locator LED on and off, or perform maintenance tasks on the ALOM CMT system
controller card itself. For more information, refer to the ALOM CMT guide for your
server.
▼
To View Environmental Information
1. Log in to the ALOM CMT system controller.
2. Use the
showenvironment
command to display a snapshot of the server’s
environmental status.
The information this command can display includes temperature, power supply
status, front panel LED status, and so on.
Advanced Lights Out Manager 1.4
Please login: admin
Please Enter password:
sc>