Fujitsu SPARC ENTERPRISE T1000, Installation Manual, Page: 31 / 84

Chapter 1 Preparing for Installation 5
The Solaris OS is preinstalled on the server. When you power on, you are
automatically guided through the Solaris OS configuration procedure. See
“To
Boot the Solaris Operating System” on page 39 .
13. Install any required patch or patches to the server.
Refer to the product notes for a list of the required patches.
14. (Optional) Load additional software from the Solaris media kit.
The Solaris media kit (sold separately) includes several CDs containing software
to help you operate, configure, and administer your server. Refer to the
documentation provided with the media kit for a complete listing of included
software and detailed installation instructions.
Slide Rail Assembly Notes
The rackmount kit has two slide rail assemblies. Each slide rail assembly can be
installed on either the right or left side of the rack.
A slide rail assembly consists of three main sections, a front section, a sliding rear
section, and a removable mounting bracket (
FIGURE 1-2
). The rackmount kit also
includes two extension brackets.
FIGURE 1-2
Slide Rail Assembly
Extension bracket
Front section
Mounting bracket
(shown removed)
Rear section