SLR 25/50 Gbyte
2 - English
A26361-H583-Z100-1-7419
Important notes
!
In this chapter you will find information regarding safety which is essential to take note of
with your drive.
Safety
This device complies with the relevant safety regulations for data processing equipment, including
electronic office machines for use in an office environment. If you have any questions, contact your
sales outlet or our customer service center.
•
This device has been developed for use in approved systems with a fire-proof casing (in
accordance with IEC 950 / EN 60950).
•
Note the power loss and the notes on environmental conditions in the "Important notes"
chapter of the system unit's Operating Manual.
Manufacturer's note
CE certificate
The shipped version of this drive complies with the requirements of the EC Guideline
89/336/EEC "Electromagnetic compatibility".
Compliance was tested in a typical system configuration.
When installing the drive, observe the specific installation notes in the Operating
Manual or Technical Manual of the receiving device.
Installation
!
Please note the information provided in the chapter "Important notes" in the Operating
Manual of the system unit or in the manual "Safety, Guarantee and Ergonomics".
The following steps must be performed to install the drive:
•
Setting the jumpers (e. g. SCSI address, parity)
•
Mounting the drive
•
Connecting the drive
•
Installing the software required (drivers, backup program)
i
The drivers required for operating SCSI drives are either part of the operating system or
are provided with the backup software.
