Chapter 4 Jumpers and Switches
© Fujitsu Semiconductor Europe GmbH
- 19 -
UG-910097-11
Jumper
Setting
Description
JP29
(SOT)
U-4 / R-0
USB ’A’ (mini USB) connected to LIN-UART4
(SOT4)
UART ’A’ (RS232/LIN) connected to MFS0 (SOT0)
U-0 / R-4
USB ’A’ (mini USB) connected to MFS0 (SOT0)
UART ’A’ (RS232/LIN) connected to LIN-UART4
(SOT4)
Table 13
. Jumper Settings for UART ‘A’ and USB ‘A’
4.15 RGB LED U10 (JP24, JP26, JP27)
The RGB LED
is connected to the pins of MCU’s Stepping Motor Controller module. They
can be controlled using PWM signals generated by this module.
JP24
This jumper connects the RGB LED (red) to the PWM2P2 of the MCU.
JP26
This jumper connects the RGB LED (green) to the PWM2M2 of the MCU.
JP27
This jumper connects the RGB LED (blue) to the PWM1P3 of the MCU.
Jumper
Setting
Description
JP24
Closed
RGB LED (red) connected to the PWM2P2
Open
RGB LED (red) not connected to the PWM2P2
JP26
Closed
RGB LED (green) connected to the PWM2M2
Open
RGB LED (green) not connected to the PWM2M2
JP27
Closed
RGB LED (blue) connected to the PWM1P3
Open
RGB LED (blue) not connected to the PWM1P3
Table 14. Jumper connections for RGB LED (U10)
4.16 QVGA Display Connector X3 (JP30, JP31)
The display requires initialization before it can be used. This initialization is performed using
the SPI interface of the display which is connected to the MCU through the jumpers, JP30
and JP31.
JP30
Connects
MCU’s SPI Clock (SCK1) to display SPCLK
JP31
Connects
MCU’s SPI Data (SOT1) to display SPDAT
Jumper
Setting
Description
JP30
Closed
MCU’s SPI clock (SCK1) connects to Display SPCLK
Open
Display SPCLK is disconnected.
JP31
Closed
MCU’s SPI data (SOT1) connects to Display SPDAT
Open
Display SPDAT is disconnected.
