FEEU Ultra-Low-Power Apollo Evaluation Kit Platform
Chapter 2 Using the Hardware
© Fujitsu Electronics Europe GmbH
- 13 -
EEU-UG-2017120001-10
2.3 Power Measurement
2.3.1 On-Board Power Measurement
The on-board debug probe is supporting power measurement. Currently the firmware is still
in development and will be supported by the latest ARM MDK / Keil µVison.
The FujitsuLink_PowerMeasurement tool can be used to visualize the power consumption
without any DVM required.
2.3.2 Power Measurement via external DVM
Connect an external Multimeter to JP3 pin 2 (+) and 3 (-) to measure the current
consumption of the MCU.
Figure 1-4: External DVM Connection
To measure also the power consumption of components at the Arduino shield, set JP16 to 2-
3 position
Figure 1-5: Include Arduino-Header in Power Measurement
