manualshive.com logo in svg

Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation, User Manual

The Operation Manual for Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.1 is now available for free download from our website. Obtain in-depth knowledge of this powerful product's operation, features, and functionalities to maximize efficiency and streamline cloud resource management. Enhance your experience with the comprehensive manual accessible at manualshive.com.

Share
Download
background image

Chapter 18 Linking L-Servers with Configured Physical

Servers or Virtual Machines

This chapter explains how to link a configured physical server to a physical L-Server and how to link a configured virtual machine to a
virtual L-Server.

 

 Information

It is possible to import L-Servers into the L-Platform management function.

For details, refer to "7.2.3 Import to L-Platforms" in the "Operation Guide CE".

18.1 Management Scope

The management scope varies depending on the resources used by the configured physical server or virtual machine.

After linking with L-Servers, resources such as servers, virtual machines, or disks can be operated using the L-Servers.

Depending on the resources which can be operated, L-Servers are referred to differently as follows:

-

L-Server for Server Operation

Refers to L-Servers that operate only servers.

-

For Physical Servers

This applies when using the hardware listed in "

18.3.1 Manageable Hardware

".

-

For Virtual Machines

This applies when using a physical server and when using server virtualization software.

-

The hardware listed in "

18.3.1 Manageable Hardware

" and "

18.3.3 Manageable Storage

"

-

The server virtualization software described in "

18.3.4 When Using Server Virtualization Software

"

-

L-Server for Server/Storage Operation

Refers to L-Servers that operate servers and disks.

-

For Physical Servers

This applies when using the hardware listed in "

18.3.1 Manageable Hardware

" and "

18.3.3 Manageable Storage

".

-

For Virtual Machines

This applies when using a physical server and when using server virtualization software.

-

The hardware listed in "

18.3.1 Manageable Hardware

" and "

18.3.3 Manageable Storage

"

-

The server virtualization software described in "

18.3.4 When Using Server Virtualization Software

"

[Solaris Zones]
L-Servers linked with a virtual machine on a VM host not managed with server management software only support "L-Server for
Server Operation".

[OVM for SPARC]
OVM for SPARC L-Servers only support "L-Server for Server Operation".

 

 Note

When linking a configured physical server to a physical L-Server, only "L-Server for Server Operation" is supported. "L-Server for Servers/
Storage Operation" cannot be created.

When disk and NIC information is successfully obtained from the configured physical server or virtual machine, that information is
displayed. The output information for NICs differs depending on the L-Server type.

- 233 -

Summary of Contents for ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation

AVG 8.5 ANTI-VIRUS - LINUX-FREEBSD REV 85.2 User Manual preview
8.5 ANTI-VIRUS - LINUX-FREEBSD REV 85.2
Brand: AVG Pages: 234
Alpha Moisture Systems SADPmini Logger Instruction Manual preview
SADPmini Logger
Brand: Alpha Moisture Systems Pages: 14
Blackberry ENTERPRISE SOLUTION ERASING FI Overview preview
ENTERPRISE SOLUTION ERASING FI
Brand: Blackberry Pages: 10
Brother Wi-Fi Direct Manual preview
Wi-Fi Direct
Brand: Brother Pages: 24
Brother MacBroidery„ Embroidery Lettering Software for Mac Manual preview
MacBroidery„ Embroidery Lettering Software for Mac
Brand: Brother Pages: 56
Brother Quattro 6000D User Manual preview
Quattro 6000D
Brand: Brother Pages: 48
Brother PE-Design 6 Instruction Manual preview
PE-Design 6
Brand: Brother Pages: 272
Brother PE-DESIGN 2.0 Instruction Manual preview
PE-DESIGN 2.0
Brand: Brother Pages: 200
Cisco Unity Express 8.0 Voice-Mail System User Manual preview
Unity Express 8.0 Voice-Mail System
Brand: Cisco Pages: 50
Cisco TELEPRESENCE MANAGEMENT SUITE PROVISIONING Troubleshooting Manual preview
TELEPRESENCE MANAGEMENT SUITE PROVISIONING
Brand: Cisco Pages: 16
Cisco Unified MeetingPlace H.323/SIP Administrator'S Manual preview
Unified MeetingPlace H.323/SIP
Brand: Cisco Pages: 54
Cisco PVDM2 24DM - Digital Modem Module User Manual preview
PVDM2 24DM - Digital Modem Module
Brand: Cisco Pages: 48
Cisco TELEPRESENCE MANAGEMENT SUITE SECURE SERVER Configuration Manual preview
TELEPRESENCE MANAGEMENT SUITE SECURE SERVER
Brand: Cisco Pages: 34
Cisco SGACL Configuration Manual preview
SGACL
Brand: Cisco Pages: 8
Cisco Unified Videoconferencing Manager Installation Manual preview
Unified Videoconferencing Manager
Brand: Cisco Pages: 22
Cisco SMART BUSINESS COMMUNICATIONS SYSTEM Feature Reference preview
SMART BUSINESS COMMUNICATIONS SYSTEM
Brand: Cisco Pages: 27
Cisco MDS 9222i - Multiservice Modular Fabric Switch Release Note preview
MDS 9222i - Multiservice Modular Fabric Switch
Brand: Cisco Pages: 40
Cisco MCS 7825 Series Installation Manual preview
MCS 7825 Series
Brand: Cisco Pages: 20

Brands by name

Popular brands

Load more brands