manualshive.com logo in svg

Fujitsu SCENICVIEW A17-3, Operating Manual

Share
Download
Fujitsu SCENICVIEW A17-3 Operating Manual Download Page 24

SCENICVIEW A17-3/A19-3 

 

Changing the monitor settings 

When putting the monitor into operation for the first time, the screen display should be optimally 
adapted to the screen controller used and adjusted in accordance with your needs. 

Choosing basic monitor settings using the supplied software 

If one of the operating systems Windows 95/98, Windows NT, Windows Me, Windows 2000, 
Windows XP or OS/2 (with Windows emulation installed) is used, the basic monitor settings can be 
set with the CD supplied (WHQL for XP and Vista). 

►

 

Insert the supplied CD into the CD-ROM drive. 

►

 Open 

the 

Readme

 file on the CD and follow the instructions in the file. 

Your monitor should now already be properly adjusted. If none of the above operating systems is 
used or minor corrections are to be made to the screen display, then change the monitor settings 
with the OSD menu. 

Changing the monitor settings with the buttons of the control panel 

 

1 =   Buttons for the OSD menu 

(On-Screen-display) 

2 =   Power indicator 
3 =   ON/OFF switch 

 

Use the buttons of the control panel to make the following monitor settings directly while the OSD 
menu is switched off. 

Performing auto-adjustment of the monitor 

►

 

Press the AUTO button for approx. 1 second while the OSD menu is switched off. 

The 

Auto Processing

 message is displayed. 

Picture quality and position are set to optimum values for your system. 

Brightness adjustment 

►

 Press 

the 

5

/ 

  button to adjust the brightness. 

The adjustment changes the background illumination. 

Activating/deactivating muting 

►

 Press 

the   button to switch the sound off and on again. 

A message is displayed that the action has been performed. 

16 

A26361-K1146-Z120-1-7619, edition 1 

Summary of Contents for SCENICVIEW A17-3



































Reviews:

No comments

Brands by name

Popular brands

Load more brands