Fujitsu SCENIC8651, Manual

Page: 36 / 60

System expansions Installing and removing drives
36
A26361-K516-Z100-3-7619
Removing an accessible drive
Open the system unit (see " Opening the system unit ").
2
1
3
Pull the data and the power supply connectors from the desired drive (1).
Remove the screws (2) and take the drive out of the system unit (3).
A
B
Insert the shielding plate (B) on the right-
hand side on the installation bay and press
it in.
Press the plastic drive cover (A) into the
front panel until it snaps in place.
Close the system unit (see " Assembling
the system unit ").
i
If necessary, you must adapt the entry for the drive in the Setup menu.