click [Next] to proceed. In some cases, you may be prompted to “Insert the
Recovery Disc #2”, depending upon the size of the Recovery Image.
18. After completion, the tool will automatically go to the next step to restore the
image back to c:\ drive.
19. When restoration is complete, you will see the message “Restoration has been
completed. Click [OK] to reboot the computer.” Click [OK].
Windows Initialization:
1.
Select a language in the "Set Up Windows" dialog, if necessary, then click [Next].
2.
Follow the instructions that appear.
3.
When Windows desktop is loaded, make sure that Wireless LAN switch is On (refer to the
system user's guide for exact location) before executing the ClickMe! utility.
4.
The first time you boot up your system, you will see a “Primary Settings for the
PC” window. This window explains the installations which will be performed by
the ClickMe! utility. Click [Execute]. ClickMe! will begin installing.
5.
If after clicking the button you receive a “User Account Control” window, you
will be asked for permission to continue. Click [Yes] to continue. If you cancel the
operation, a Click Me! icon will appear on your desktop for later installation.
Additional drivers and 3rd party applications
Some drivers and 3rd party applications are not included in the recovery image. You will need to
install them from the discs supplied with your system.
Installation from Drivers and Applications Restore (DAR) disc:
1.
Insert the DAR disc in your DVD drive.
2.
Select [Run Setup.exe] in "AutoPlay" dialog. If the "AutoPlay" dialog doesn't appear,
double-click on Setup.exe in the root folder of the DAR disc.
3.
Click [Allow] in "User Account Control" dialog, then click [Continue].
4.
Review the End User License Agreement. Select "I Agree", then click [Next].
5.
Click [Select All], then click [Install Selected Subsystems].
6.
After the components are installed, click [OK].
7.
Click [OK] to reboot your system. You must save and close all of your documents at this
point.
8.
After the system has rebooted, start the DAR disc again following steps 1-4.
9.
Review the list of the available components. Select and install the applications marked in
green by clicking [Install Selected Subsystems] button.
Please note that some components are optional and may not be installed in the system.
Installation from 3rd party discs:
Some of the applications might be provided on separate discs with your system in the box.
1.
Insert a disc in your DVD drive.
2.
Start the installation (typically by clicking Setup.exe)
3.
Follow the installation wizard.
B6FJ-3971-01EN-00 .fm Page 2 Monday, December 7, 2009 9:12 AM
