Fujitsu PRIMERGY TX300 S5, Options Manual

Page: 103 / 142

TX300 S5
Options Guide 103
Conversion from a floorstand model to a rack model
12.3 Removing the foot mounting rail
Figure 72: Removing the foot mounting rail
Ê Loosen the three screws (1) of the foot mounting rail.
Ê Slide the foot mounting rail backward (2) until the hooks (a) unlock.
Ê
Remove the foot mounting rail (3).
I
The foot mounting rail is no longer required.
12.4 Accessible drives and operating panel
module
The drive cage for the accessible drives is constructed in such a way that the
accessible drives and the operating panel module can be taken out simply,
turned through 90° to the left, and then be reinstalled.
Ê Remove the dummy covers from the drive cage ( figure 19 on page 43 ).
Ê Unplug the cables from the system board or the accessible drives and
remove the drives from the drive cage.
Ê Pull the operating panel module forward out if its mounting location until you
can pull the I²C cable, the ribbon cable, and the USB cable out of the
operating panel module. Remove the three cables.
Ê
Remove the operating panel module.
a
1
1
1
3
2