Fujitsu PRIMERGY TX300 S5, Options Manual, Page: 39 / 142

TX300 S5
Options Guide 39
Main memory Extending/replacing the main memory
●
The channels must be equipped with memory modules that are organized
identically (#ranks, #rows, #cols, #banks).
●
Channel C is the only possible spare channel.
●
The memory slots within a channel do not need to be equipped identically.
●
The corresponding memory slots of all three channels must be equipped
identically (example: 1A-1B-1C).
5.2 Extending/replacing the main memory
Ê Open the server (see chapter "Preparation" on page 23 ).
Ê Remove the fan bracket (see section "Removing the fan bracket" on
page 33 ).
Figure 16: Removing a memory module
Ê Press the holders on either side of the mounting location concerned
outward (1).
Ê If the slot was equipped: pull the memory module out of the slot (2).
/
/
0