TX200 S5
Operating Manual
19
Preface
Performance features
ServerView Installation Manager
You can configure the PRIMERGY server quickly and precisely with the
ServerView Installation Manager software provided. User-guided menus are
available for installing the server operating system (for further details see
section
“Configuring the server” on page 73
Service and support
PRIMERGY servers are easy to maintain and modular, thus enabling quick and
simple maintenance.
The handles and locks (touch point) used to exchange components are colored
green to ensure simple and immediate recognition.
In order to prevent the components from being damaged by incorrect handling
when they are being installed and removed, the areas of all components that
can be touched without damaging them are also marked green.
PRIMERGY diagnostic LEDs fitted on the system board show which component
(memory module, processor, fan or expansion card) is not functioning properly.
The flash EPROM program supplied with the Fujitsu Technology Solutions
utilities supports a fast BIOS update.
With the iRMC S2 (integrated Remote Management Controller) on the system
board, the PRIMERGY PRIMERGY TX200 S5 server can also be maintained
and serviced remotely. This enables remote diagnosis for system analysis,
remote configuration and remote restart should the operating system or
hardware fail.
