Fujitsu PRIMERGY TX1310 M3, Upgrade And Maintenance Manual

Page: 23 / 234

TX1310 M3
Upgrade and Maintenance Manual 23
Before you start
2.3 Tools you need at hand
When preparing the maintenance task, ensure that all required tools are
available according to the overview below. You will find a list of required tools at
the beginning of each procedure.
List of used screws (not valid for Japan)
Screw driver/
bit insert
Torque
Screw Usage Type
Phillips
PH2 / (+) No. 2
hexagonal cross
SW5 / PZ2
0.6 Nm
HDD cage
M3 x 4.5 mm
(silver)
C26361-K1444-C11
Phillips
PH2 / (+) No. 2
hexagonal cross
SW5 / PZ2
0.6 Nm
System
board, slot
bracket,
chassis
M3 x 4.5 mm
(silver)
C26192-Y10-C67
TPM bit insert
Dedicated TPM
screw driver /
TPM module
fixing tool
0.6 Nm
TPM screw
One way
head
REM 3 x 15 mm
(black)
C26192-Y10-C176
Phillips
PH1 / (+) No. 1
0.4 Nm
HDD cage
door lock M3 x 3.5 mm
(silver)
C26192-Y10-C102
Table 2: List of used screws (not valid for Japan)