Fujitsu PRIMERGY TX1310 M3, Upgrade And Maintenance Manual

Page: 20 / 234

20 Upgrade and Maintenance Manual
TX1310 M3
Before you start
2.1.2 Upgrade and Repair Units (URU)
Upgrade and Repair Units are non hot-plug components that can be ordered
separately to be installed as options (Upgrade Units) or are available to the
customer through customer self service (Repair Units).
I
For Japan, customer allows only upgrade. For upgrade units as
customer replaceable, please refer to:
http://www.fujitsu.com/jp/products/computing/servers/primergy/
I
Server management error messages will report defective Upgrade and
Repair Units.
Upgrade and repair procedures involve shutting down and opening the server.
V
CAUTION!
The device may be seriously damaged or cause damage if it is opened
without authorization or if repairs are attempted by unauthorized and
untrained personnel.
Components that are handled as Upgrade Units
– CPUs (upgrade kits)
– ODDs
– Backup drives
– Expansion cards
– Memory modules
Components that are handled solely as Repair Units
– CMOS battery
– Non hot-plug fans
– Non hot-plug HDDs
Upgrade and Repair Units (URU)