TX1310 M3
Upgrade and Maintenance Manual
17
2
Before you start
Before you start any upgrade or maintenance task, please proceed as follows:
Ê
Carefully read the safety instructions in chapter
Ê
Make sure that all necessary manuals are available. Refer to the
documentation overview in section
"Documents you need at hand" on
. Print the PDF files if required.
Ê
Make yourself familiar with the procedure categories introduced in section
"Classification of procedures" on page 19
Ê
Ensure that all required tools are available according to section
Advanced Thermal Design
The Advanced Thermal Design option allows you to operate the system with a
wider temperature range of 5 °C to 40 °C, depending on your system and
configuration.
V
CAUTION
In a system that is configured with Advanced Thermal Design, only
certain components which support the respectively increased higher
operating temperature range may be installed and used. For applicable
restrictions, please refer to the official configurator tool.
This option can only be ordered from the manufacturer and is
indicated by the respective logo on the identification rating
plate.
Summary of Contents for PRIMERGY TX1310 M3
