Fujitsu PRIMERGY TX1310 M1 Operating Manual Download Page 56 | Manualshive

Page: 56 / 66

Fujitsu PRIMERGY TX1310 M1 Operating Manual Download Page 56

56

Operating Manual

TX1310 M1

Starting up and operation

6.4.2

Configuring the server and installing the operating
system with the ServerView Installation Manager

Using the ServerView Installation Manager on the ServerView Suite DVD
provided, you can conveniently configure the server and install the operating
system. This includes configuring the server-specific settings using the
ServerView Configuration Manager and configuring the RAID controller using
the

ServerView RAID Manager

.

Advantages of the ServerView Installation Manager

– Wizard assisted configuration of your server hardware and disk arrays

– Wizard assisted installation of all leading server operating systems

– Wizard-assisted creation of configuration files for unattended installation of

several PRIMERGY servers with identical hardware configurations.

– Installation of drivers and additional software.

I

The software that can be installed depends on your server’s hardware
configuration. This configuration is detected automatically.

To find out how to operate the ServerView Installation Manager and for further
information, refer to the associated manual.

If you are using the ServerView Installation Manager, you can skip the following
section on how to configure the server and install the operating system.
Continue from section

"Cleaning the server" on page 58

.

«
...
54
55
56
57
58
...
»

Summary of Contents for PRIMERGY TX1310 M1



































































Reviews:

No comments