manualshive.com logo in svg

Fujitsu PRIMERGY TX120 S2, Operating Manual, Page: 58 / 78

Share
Download
Fujitsu PRIMERGY TX120 S2 Operating Manual Download Page 58

58

Operating manual

 TX120 S2

Cleaning the server

Starting up and operation

5.4.4

Configuring the server and installing the operating 
system without the ServerView Installation 
Manager

Configuring the onboard SATA controller

Configure the controller as described in section 

“Configuring the onboard SATA 

controller” on page 55

.

Configuring the SAS/SATA RAID controller

Configure the controller as described in section 

“Configuring the onboard SATA 

controller” on page 55

.

Installing the operating system

Ê

Insert the CD/DVD for the operating system you want to install.

Ê

Reboot the server.

Ê

Follow the instructions on screen and in the manual for the operating 
system.

5.5

Cleaning the server

V

CAUTION!

Switch the server off and disconnect the power plugs from the grounded 
shockproof sockets.

Do not clean any interior parts yourself; leave this job to a service 
technician.

Do not use any cleaning agents that contain abrasives or may corrode 
plastic.

Ensure that no liquid enters the system. Ensure that the ventilation areas 
of the server and the monitor are clear.

Clean the keyboard and the mouse with a disinfecting cloth.

Wipe the server and monitor casing with a dry cloth. If particularly dirty, use a 
cloth that has been moistened in a mild domestic detergent and then carefully 
wrung out.

Summary of Contents for PRIMERGY TX120 S2















































































Reviews:

No comments