Fujitsu PRIMERGY RX600 S6, Service Supplement Manual

Page: 48 / 62

48 Service Supplement
RX600 S6
Replacement routines
Ê
Pull the defective power distribution board in the direction of the arrow and
lift it out of the housing.
Installing the power distribution board
Ê
To install the new power distribution board follow the above steps in reverse.
4.13 Replacing the TPM
TPM is the short form for Trusted Platform Module.
V
CAUTION!
Advise the customer that he must provide you with TPM backup copies.
For security reasons, the TPM must be restored/re-saved by the
customer.
If the customer does not have a backup copy available, inform him that
replacing the TPM board will cause him to lose all his data.
Ê
Open the server as described in section "Opening the server" on page 21 .
Ê
Remove the system board as described in section "Replacing the system
board" on page 38 .
Ê
Lay the system board on a soft, antistatic surface with its component side
facing down.
Figure 27: Locating the slotted lower end of TPM screw
Ê
Locate the slotted lower end of the TPM screw (see circle).