Fujitsu PRIMERGY RX600 S4, User Manual

Page: 35 / 230

35
PRIMERGY RX600 S4 User's Guide
1.4.4 Inserting and Ejecting a CD/DVD
This section explains how to insert and eject a CD/DVD.
To prevent causes of mechanical failures, observe the precautions about handling CD/DVD stated
below.
„
Cautions for handling drives
• Avoid an area with high humidity and airborne dust level. Electric shocks and/or server failures may
be caused by liquids such as water, or metallic items, such as paper clips, entering a drive.
• Do not use the drive in an area where is easily influenced by shocks and vibrations.
• Do not insert any objects other than the specific CD/DVDs.
• Do not pull on, press hard, or handle the CD/DVD tray roughly.
• Do not disassemble the CD/DVD drive.
• Before use, clean the CD/DVD tray using a soft, dry cloth.
• As a precaution, remove discs from the CD/DVD drive when the drive is not to be used for a long
time. Keep the CD/DVD tray closed to prevent foreign matter, such as dust, from entering the CD/
DVD drive.
„
Cautions for handling media
• Hold CD/DVDs by their edges to avoid contact with the disc surface.
• Do not contaminate the CD/DVD surface with fingerprints, oil, dust, etc. If dirty, clean with a soft,
dry cloth, wiping from the center to the edge. Do not use benzene, thinners, water, record sprays,
antistatic agents, or silicone-impregnated cloth.
• Be careful not to damage the CD/DVD surface.
• Keep the CD/DVDs away from heat sources.
• Do not bend or place heavy objects on CD/DVDs.
• Do not attach stickers or similar to the label side. Doing so may cause rotational eccentricity and
abnormal vibrations.
• When a CD/DVD is moved from a cold place to a warm place, moisture condensation on the CD/
DVD surface can cause data read errors. In this case, wipe the CD/DVD with a soft, dry cloth then let
it air dry. Do not dry the CD/DVD using devices such as a hair dryer.
• To avoid dust, damage, and deformation, keep the CD/DVD in its case whenever it is not in use.
• Do not store CD/DVDs at high temperatures. Areas exposed to prolonged direct sunlight or near
heating appliances are to be avoided.
Vision Damage
• Do not look at the light source of the CD/DVD drive laser beam directly. Doing
so may lead to visual damage.