Fujitsu PRIMERGY RX600 S4, User Manual

Page: 166 / 230

166
Chapter 7 Configuring Hardware and Utilities
7.2.14 CPU Status Submenu
This menu is for setting whether to allow the use of the installed CPU.
ASR&R Boot Delay 2 (Unchangeable) Sets the standby time in minutes for the system reboot
after shutdown due to trouble (such as overheating). The
system reboots after the set standby time.
Power Cycle Delay 7 (Unchangeable) Sets the time until the server is turned on again after it is
turned off.
Temperature Monitoring
• Disabled (Initial value)
• Enabled
Sets whether to turn on the power when ambient
temperature is abnormal.
Boot Retry Counter • 3 (Initial value)
• 0 to 7 Sets the maximum number of retries from 0 to 7 for
booting the OS.
CPU Status Sets whether to allow the use of the installed CPU.
J
"7.2.14 CPU Status Submenu" (pg.166)
Memory Status Sets whether to allow the use of the installed memory module slots.
J "7.2.15 Memory Status Submenu" (pg.167)
PCI Status Displays each PCI status on this server.
J "7.2.16 PCI Status Submenu" (pg.168)
Console Redirection
Configures detailed settings for console redirection.
J
"7.2.17 Console Redirection Submenu" (pg.169)
IPMI Configures detailed settings for IPMI.
J
"7.2.18 IPMI Submenu" (pg.170)
table: CPU Status submenu
Item Setting Description
CPU 1 Status Enabled (Unchangeable)
Sets whether to allow the use of the CPU installed in the
CPU socket.
table: Server menu
Item Setting Description
Item Specific Help
Change Values
Enter
F9
Select Item
Select Menu
Select Sub-Menu
-/+
F1
Esc Info
Exit
F10
Setup Defaults
Save and Exit
CPU Status
[Enabled]
[Enabled]
[Enabled]
[Enabled]
CPU 1 Status :
CPU 2 Status :
CPU 3 Status :
CPU 4 Status :
Re-enable Failed CPUs
Power Server Boot
Phoenix TrustedCore(tm) Setup Utility