Fujitsu Primergy RX600 S2, User Manual

Page: 245 / 299

245
PRIMERGY RX600 S2 User’s Guide
8
Con
figurin
g Hardwa
re
a
nd utili
ties
8.3.7 Devices Menu
Settings for devices are configured on the [Devices] menu.
table: Items on the Devices Menu
Item Settings Description
IDE Controller Configuration for IDE Controller
Enable Serial ATA
Enabled
（
unchangeable
）
Set to enable the Serial ATA controller.
Primary Master ICH IDE Controller The device name of controller is displayed.
Mass Storage Configuration for onboard SCSI array controller
Enable On-board SCSI
Enabled
（
unchangeable
）
Set to enable the onboard SCSI array controller.
RAID Activation Key Installed The information whether the onboard RAID
Activation Key is installed or not is displayed.
LAN Configuration for onboard LAN controller
Enable On-board NIC
• Enabled
（
initial value
）
• Disabled
Set whether or not to enable the onboard LAN.
Enable On-board NIC ROM
• Enabled
（
initial value
）
• Disabled
Set whether or not to enable the expansion
ROM with the onboard LAN.
NIC 1 MAC Address The MAC address of the onboard LAN 1 is displayed.
NIC 2 MAC Address The MAC address of the onboard LAN 2 is displayed.
Video Configuration for video controller
Enable On-board Video
Enabled
（
unchangeable
）
Set to enable the onboard video controller.
BIOS SETUP UTILITY
Devices
Main Processor Memory Devices Server Security Save, Restore & Exit
Examine and set system parameters for built-in
Devices .
> IDE Controller
> Mass Storage
> LAN
> Video
> USB
> Serial Ports
> PCI
Examine and set IDE controller parameters.
Esc = Exit
F9 = Reset to Defaults
F10 = Save and Exit
<Enter> = Select Entry
= Move Highlight