Fujitsu Primergy RX600 S2 User Manual Download

Page: 114 / 299

114

Chapter 4 Manual OS Installation

4.1.2 How to Create Driver Disks [FloppyBuilder function]

Driver disks are created from the ServerStart CD-ROM using the ServerStart FloppyBuilder function.

The FloppyBuilder function is available in the following environments.

• Starting up the ServerStart system on a client computer (Recommended)

• Starting up the system from the ServerStart CD-ROM on the server

When creating driver disks on a client computer, it is necessary to install ServerStart on the client

computer beforehand. Install it according to "2.4 Preparation for Using ServerStart on a Client

Computer" (

pg.53).

If a different version of ServerStart has been installed, uninstall it and install the proper version. For

details on how to uninstall ServerStart, refer to "2.4.2 Uninstalling ServerStart" (

pg.56).

The FloppyBuilder function may not operate correctly if you start up ServerStart while ServerStart of a

different version is installed in the computer. Make sure to uninstall a different version of ServerStart.

ServerStart cannot be started with Windows Server 2003 x64. Please start ServerStart by client

computer or Server in which Windows Server 2003/Windows 2000 Server is installed.

■

Starting ServerStart

If ServerStart has already been started, you do not have to restart it. If it is not started, perform the

following startup procedures.

●

For Creation on a Client Computer

When the CD has been copied on Windows 2000 Professional/Windows XP
Professional

Click [Start]

→

[Programs]

→

[Fujitsu ServerStart]

→

[ServerStart].

ServerStart starts up and the [Welcome to ServerStart] window appears.

Summary of Contents for Primergy RX600 S2












































































































































































































































































































Search results

Summary of Contents for Primergy RX600 S2

Reviews:

Related manuals for Primergy RX600 S2

Brands by name

Popular brands

Fujitsu Primergy RX600 S2, User Manual

Search results

Summary of Contents for Primergy RX600 S2

Reviews:

Related manuals for Primergy RX600 S2

Brands by name

Popular brands