Fujitsu Primergy RX300 S4, User Manual

Page: 157 / 267

157
PRIMERGY RX300 S4 User's Guide
Installation location and order of expansion cards
Install each expansion card in the PCI slots in the number order described in the following table and
install them according to the installation order. Expansion cards will not operate normally unless
installed in the specified locations.
–
: indicates that it cannot be installed
Notes on installing expansion cards
Notes on individual cards
For information about specific expansion cards, refer to the manual supplied with the card and the notes
provided with the server. Also, check the following for various expansion cards.
table: Installation location/order of expansion cards
Product name (Product ID)
PCI slot Maximum
number of
installed
cards
Installation
order
1 2 3 4 5 6 7
SAS RAID Ctrl
1 – – – –
–
– 1
7
1
SAS RAID Ctrl (PG-248CL) 1 – – – – – – 1 2
Serial Port (PG-COM03)
– – – – – – 1 1 3
Parallel Port Option (PG-PP05)
– – – – – 2 1 1 4
SAS RAID Ctrl (PG-244CL)
– 1 – – – – – 1 5
SAS RAID Ctrl (PG-248G2L) – 1 – – – – – 1 6
SAS Ctrl (PG-228BL) – 3 1 – 4
2
– 3 7
SCSI Ctrl U320 lp (PG-2281L) – 1 2 –
3 4
– 1 8
Fibre Channel Controller (PG-FC202)
– 4 3 – 2 1 – 2
9
Eth. Ctrl 1000-BASE-SX Fibre LC lp
(PG-1882L)
– – – 1 – – –
1
10
Eth. Ctrl 1000-BASE-T Cu lp
(PG-1892L)
– – – 1 – – –
11
Eth. Ctrl 1x1Gbit PCI 1000-BASE-T lp
(PG-1853L)
– – – 1 – – – 12
Eth. Ctrl 2x1Gbit PCI-X 1000-BASE-T lp
(PG-1863L)
– – – 1 – – – 13
Eth. Ctrl 1x1Gbit PCI-E 1000-BASE-T lp
(PG-289L)
– 5 4 – 3 2 1 4 14
Eth. Ctrl 1x1Gbit PCI-E 1000BASE-SX
lp (PG-288L)
– 5 4 – 3 2 1 4 15
Eth. Ctrl 2x1Gbit PCI-E 1000-BASE-T lp
(PG-2861L)
– 5 4 – 3 2 1 4 16