Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual Download Page 53

Page: 53 / 680

▶

Inform the system administrator that the server will be shut down and put

offline.

▶

Terminate all applications.

▶

Perform the required procedures described in the preliminary steps of each

upgrade or maintenance task.

▶

Shut down the server.

If the system is running an ACPI-compliant operating system (OS),

pressing the On/Off button will perform a graceful shutdown.

4.4

Disconnecting the power cord

4.4.1

Disconnecting the power cord (AC PSU)





Figure 4: Unlocking the cable clamp of a PSU

▶

Press the cable clamp down until it disengages (1).

▶

Open the cable clamp (2).

Basic hardware procedures

RX2540 M6

Upgrade and Maintenance Manual

Summary of Contents for PRIMERGY RX2540 M6









































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PRIMERGY RX2540 M6

Reviews:

Related manuals for PRIMERGY RX2540 M6

Brands by name

Popular brands

Fujitsu PRIMERGY RX2540 M6, Upgrade And Maintenance Manual

Search results

Summary of Contents for PRIMERGY RX2540 M6

Reviews:

Related manuals for PRIMERGY RX2540 M6

Brands by name

Popular brands