Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual Download Page 498

Page: 498 / 680

16.6.2 Installing an M.2 SSD

Upgrade and Repair Unit

(URU)

Hardware: 5 minutes
Software: 15 minutes

Tools:

Phillips PH2 / (+) No. 2 screw driver (for cover 2)

Preliminary steps

▶

If applicable,

"Removing the front cover with lock" on page 52

▶

"Shutting down the server" on page 52

▶

"Disconnecting the power cord" on page 53

▶

"Getting access to the component" on page 56

Installing the M.2 SSD

CAUTION

An M.2 SSD in M.2 SSD1 is not recognized, if M.2 SSD2 is free.

▶

Install the M.2 SSD2 first.

To support different length of M.2 SSD, the M.2 SSD latch can be

moved to another position.

System board and components

498

Upgrade and Maintenance Manual

RX2540 M6

Summary of Contents for PRIMERGY RX2540 M6









































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PRIMERGY RX2540 M6

Reviews:

Related manuals for PRIMERGY RX2540 M6

Brands by name

Popular brands

Fujitsu PRIMERGY RX2540 M6, Upgrade And Maintenance Manual

Search results

Summary of Contents for PRIMERGY RX2540 M6

Reviews:

Related manuals for PRIMERGY RX2540 M6

Brands by name

Popular brands