Fujitsu Primergy RX200 S4, User Manual

Page: 190 / 269

190
Chapter 7 Configuring Hardware and Utilities
7.2.10 IPMI Submenu
This submenu appears when selecting [IPMI] from the [Advanced] menu.
Use this submenu to configure the integrated Remote Management Controller (iRMC) settings.
table: Items on the IPMI Submenu
Item Setting Description
SEL Load Displays the percentage of the System Event Log (SEL) stored.
Clear System Event Log • Disabled (Initial value)
• Enabled Sets whether or not to delete the logs stored in the
System Event Log (SEL).
Event Log Full Mode Overwrite (Unchangeable) Configures the log settings when the SEL becomes
full.
iRMC Time Sync Enabled (Unchangeable) Sets whether or not to synchronize the internal
timer of the integrated Remote Management
Controller (iRMC) with the system time.
System Event Log Displays the content of the SEL.
The system event logs referable in this submenu are for reference only. For details
on the system event logs, see "8.3 System Event Log" (
p.221).
SDRR Browser Displays data for each sensor.
LAN Settings Sets the LAN when remote controlled by the RemoteControlService.
" LAN Settings submenu" (p.191)
PhoenixBIOS Setup Utility
Item Specific Help
Advanced
IPMI
**%
[Disabled]
[Overwrite]
[Enabled]
SEL Load
Clear System Event Log:
Event Log Full Mode:
iRMC Time Sync:
System Event Log
SDRR Browser
LAN Settings
>
>
>