Fujitsu Primergy RX200 S4, User Manual

Page: 160 / 269

160
Chapter 6 Installing Internal Options
6.6 Installing an Internal DVD-ROM
Unit
This section explains how to install a internal DVD-ROM unit.
For the procedure for handling a DVD-ROM, refer to "1.4.4 Inserting and Ejecting a
CD/DVD" ( p.33).
6.6.1 Installation Location of Internal DVD-ROM Unit
Install the internal DVD-ROM unit in the CD/DVD drive on the front of the server.
6.6.2 Installable Internal DVD-ROM Units
The following DVD-ROM unit can be installed in this server.
Optional internal DVD-ROM unit package
Before installing an optional internal DVD-ROM unit, see "Appendix B.3 Internal DVD-ROM Units"
( p.247) to check the packaged contents.
• Before installing or removing an internal DVD-ROM unit, turn off the server and
all peripheral devices, and unplug all power cables from the server. Failure to
do so may cause electric shock ( "1.4.3 Turning Off the Server" (p.32)).
• When installing a DVD-ROM, hold it by the side.
Applying force to the top may cause failures.
• The circuit boards and soldered parts of internal options are exposed and can
be damaged by static electricity.
Before handling them, first touch a metal part of the server to discharge static
electricity.
• Do not touch the circuitry on boards or soldered parts. Hold the metallic areas
or the edges of the circuit boards.
table: Installable internal DVD-ROM unit
Product name Product ID Remarks
DVD-ROM SATA
PG-DV106
SATA
[Front of the server]
CD/DVD drive (optional)