40
Options Guide
RX200
S3
Installing controllers
Controllers in Non-Hot-Plug PCI Slots
Figure 23: low profile: Slot #1; standard height or low profile: Slot #2
Ê
Plug the board into the PCI slot on the riser card that is suitable for the height
of the board.
I
Make sure that the slot cover fits into the appropriate recess.
Ê
If necessary, plug in the cables on the board and other components.
Reinstalling the riser card holder
Ê
Position the riser card holder on the system board’s PCI slots.
Ê
Using the green points labeled with “PUSH”, push the riser card carefully
into the PCI slots.
Ê
Close the server, plug in the power plugs, and switch on the server as
described in the
chapter “Completion” on page 41
f.
Slot #1
Slot #2
