System expansions for tower server
SCSI hard disk drives
50
A26361-K632-Z100-1-7619
Removing a SCSI hard disk drive
1
2
2
1
Ê
Fold up the carrier handle (1) and pull on it to remove the hard disk carrier out of the installation
bay (2).
If a hard disk drive has been removed and no new drive is installed in its place, then a blank insert
must be installed in the empty bay.
2
1
1
Ê
Press the two tabs at the left and right on the blank insert together somewhat (1) and insert the
blank insert in the empty bay (2). Make sure that the blank insert engages properly in the bay.
