36
3 Install M6 core spring nuts on the front of the existing rack.
Install M6 core spring nuts at the bottom of the front H frame of the rack, on the side to be connected to the other rack (right
side when viewed from the front).
For information on the procedure for installing the core spring nuts, see "4.2 Installing and Removing Core Spring Nuts”
which is described in the User’s manual of the 19-inch rack Model 2742"
4 Attach the shield rubber on the connection side.
Attach vertical shield rubber jointing strips 1 and 2 to the front and rear H frames on the right side of the existing rack.
Either one can be attached to the top.
For information on the locations for attaching them, see the detailed figure that shows the locations for attaching the vertical
shield rubber jointing strips.
Attach the horizontal shield rubber jointing strip 1 and 2 to the upper D frame on the right side of the existing rack.
Either one can be attached to the top.
For information on the location for attaching it, see the detailed figure that shows the locations for attaching the horizontal
shield rubber jointing strips.
front
↓
front side of the rack
↑
upper side of the rack
Positioning of horizontal shield rubber
jointing strip in detail
Positioning of vertical shield rubber
jointing strip in detail