Fujitsu PRIMEQUEST 440, System Design Manual

Page: 140 / 280

4-34 C122-B001-02EN
CHAPTER 4 Hardware System Management
4.3.5 Log collection, analysis, and display
This function collects, analyzes, and displays logs related to the hardware error
monitoring function.
When various types of events and messages are posted from firmware, various types
of drivers, and the OS, this function records them in log files and takes a predefined
action (notification by e-mail, notification to the REMCS, and log output). The
recorded logs can be filtered based on conditions such as the time period messages are
posted and the target message type, so as to display an appropriate number of log
records on the screen.
The following table lists log files and information the PSA collects in the files.
Table 4.4 Log file information
Log file type Description
Agent message log Information related to the events (excluding event IDs
00000 to 09999 detected in the PSA) for which the PSA
took action (recording to an OS log, SNMP trap, etc.) is
stored in the agent log. This log can be displayed in a
format supported by the GUI and can be downloaded in
the form of a CSV-format file.
Error record log Information on firmware-detected errors is recorded by
the OS machine check handler. The PSA monitors the
error information recorded by the OS machine check
handler and stores it in an OS log file.
System event log System event logs are logged by the MMB. From a
partition, information related to the partition can be
collected. The PSA periodically performs polling of the
system event logs and stores them in OS log files. The
stored SEL information can be displayed in a format
supported by the GUI and can be downloaded in the form
of a binary file.