2-6
U41644-J-Z816-5-76
Laufende K/F 2
(2) Cable list
When determining the total length of the external interface cable to be connected to
the PRIMEQUEST 520A*/520/420, allow for an extra length of cable for pulling out
the units.
Table 2.1 Cable list (basic interface and peripherals)
*: not supported by Fujitsu Technology Solutions
NO.
Name
Order code
Japan
Outside
Japan
Packaging
Length
[m (ft.)]
1
Twisted pair cable
(Category 5 UTP cable)
TPCBL-B005
Y
Y
Optional: Select 5, 10, 15,
30, 50, or 100 m.
This cable is required if
100Base-TX or 10Base-T is
used. (category 5)
RJ45 8 Pin - RJ45 8 Pin
5 (16)
TPCBL-B010
Y
Y
10 (33)
TPCBL-B015
Y
Y
15 (49)
TPCBL-B030
Y
Y
30 (98)
TPCBL-B050
Y
Y
50 (164)
TPCBL-B100
Y
Y
100 (328)
2
Enhanced category 5 UTP
cable
TPCBL-C005
Y
Y
Optional: Select 5, 10, 15,
30, 50, or 100 m.
This cable is required if
1000Base-T, 100Base-TX,
or 10Base-T is used.
(category 5e)
RJ45 8 Pin - RJ45 8 Pin
5 (16)
TPCBL-C010
Y
Y
10 (33)
TPCBL-C015
Y
Y
15 (49)
TPCBL-C030
Y
Y
30 (98)
TPCBL-C050
Y
Y
50 (164)
TPCBL-C100
Y
Y
100 (328)
3
UPS cable
DCBL-UPK05
Y
Y
This cable is required for
connection to the UPS
(F987xx).
5 (16)
DCBL-UPK15
Y
Y
15 (49)
4
UPS interface branch
connector
UPS-B
Y
Y
Branch connector box that is
used to connect two UPS
(F987xx) units to a single
UPC interface. (Comes with
a 2.2 m cable for connecting
the device to the box.)
2.2 (7)
5
UPS interface six-branch
connector
UPS-B1
Y
Y
Branch connector box that is
used to connect six UPS
(F987xx) units to a single
UPC interface. (Comes with
a 2.5 m cable for connecting
the device to the box.)
2.5 (8)
6
SCSI cable
DCBL-SCP05
Y
Y
Optional: Select 5 or 10 m.
VHDCI 68-pin, male to
VHDCI 68-pin, male
5 (16)
DCBL-SCP10
Y
Y
10 (33)
Y:
Supported