48
U41290-J-Z816-3-76
CHAPTER 5 Main Unit Operator Panel
5.1.1
Exterior view of the operator panel
This section describes the operator panel.
For information about the contents of the status indication LCD and operation of
switches, see
Section 5.3, "Using the Operator Panel."
Note:
Pressing a switch might cause display of a confirmation message on the state
indication LCD. If this occurs, confirm the displayed message, then press
the switch again.
Figure 5.1 Operator panel
(1)
State indication LCD
The state indication LCD shows a message or symbol during operation.
(2)
POWER LED (green)
The POWER LED lights in green when the main unit power is turned on.
(3)
CHECK LED (amber)
The CHECK LED lights in amber if an error occurs in the main unit.
(4)
Mode switch (3-position slide switch)
The mode switch, which is on the operator panel, has three modes that can be
selected: LOCK, UNLOCK, or MAINTENANCE. Use this switch to enable or
disable the operations from the operator panel. For details about the mode switch,
refer to