Fujitsu Plasmavision P50XCA30WH User Manual Download

Page: 26 / 32

E-16

• Selecting the settings of D-SUB Input terminal

You can use this option to select the signal system it will receive to D-SUB Input terminal.

(1) Select D-SUB Input and press

D-SUB Input screen appears.

(2) Select the signal system to receive.

Each time you press or

, one of the available choices appears in the following

sequence:

RGB-PC

Decoder

RGB-PC: For using RGB for PC

Decoder:

For using digital tuner with RGB signal input.

(3) Press

to select Mask.

(4) Select Decoder by FUNCTION to set up Mask.

Each time you press or

, one of the available choices appears in the following

sequence:

Off:

Does not mask.

Number: Masks the fringe (top, bottom, right and left) of the screen by the number of

pixels specified.

(5) Press

to store.

"D-SUB Input" selection screen

1234567890123456789012345678901

This fringe part is masked.

• Setting Display Information (OSD)

You can use this option to select whether to display information other than menus. (Error messages

are displayed regardless of what choice you make for this option.)

Each time you press , one of the available choices appears in the following sequence:

Off

On : Displays all information.

Off : Displays only menus and error messages.

Press

to store.

• Selecting Language (Language)

You can use this option to select the language displayed on the screen.

(1) Select “Language” and press

The “Language” selection screen will appear.

(2) Press

to select your desired language.

English

Deutsch (German)

Español (Spanish)
Français (French)

Italiano (Italian)

Português (Portuguese)
Pycc

кий

(Russian)

(3) Press

The menu is displayed in the selected language.

* Russian can only be set with the E-model.

OTHER ADJUSTMENTS (FEATURES MENU)(Continued)

ON SCREEN MENU

INPUT TERMINAL

"Language" selection screen

E-MDH00771-01(14-16)

03.11.12, 0:59 PM

Page 16

Adobe PageMaker 6.5J/PPC

Summary of Contents for Plasmavision P50XCA30WH

































Search results

Summary of Contents for Plasmavision P50XCA30WH

Reviews:

Related manuals for Plasmavision P50XCA30WH

Brands by name

Popular brands

Fujitsu Plasmavision P50XCA30WH, User Manual

Search results

Summary of Contents for Plasmavision P50XCA30WH

Reviews:

Related manuals for Plasmavision P50XCA30WH

Brands by name

Popular brands