manualshive.com logo in svg

Fujitsu Plasmavision P42HCA10, User Manual, Page: 9 / 41

Share
Download
Fujitsu Plasmavision P42HCA10 User Manual Download Page 9

E-9

4

Power input terminal

Connect this terminal to the power cable supplied with the display.

When connecting a cable,attach a ferrite core to the cable. (See P. E-13)

5

External speaker output terminal (EXT SP)

Connect this terminal to the optionally available speaker.

 (When using other speaker than the optional one, use 4–16 

Ω

 speaker.)

When connecting a cable, attach a ferrite core to the cable. (See P. E-13)

* See the speaker instruction manual for more information.
* P42VCA11/P42HCA11/P50XCA11/P42VCA21 only.

6

Sound 1 input terminal (AUDIO1 INPUT)

7

Sound 2 input terminal (AUDIO2 INPUT)

8

Sound 3 input terminal (AUDIO3 INPUT)

Connect this terminal to the sound output terminal of your computer, etc. (See P.E-30 for the selection of audio input for video input.)

* This terminal is not available for P42VCA10/P42HCA10/P50XCA10/P42VCA20.

9

RGB2 input terminal (RGB2 INPUT/BNC)

Connect this terminal to the PC's display (analog RGB) output terminal or decoder (digital broadcast tuner,etc.) output terminal.

0

RGB2 synchronization switch (SYNC SW  TTL/ANALOG (75 

Ω

))

This switch is used to terminate horizontal (H) terminal and vertical (V) terminal, out of RGB2 input terminals, with 75 

Ω

 .

 TTL

: Does not terminate.

 ANALOG (75 

Ω

): Terminates.

English

 E-P42VCA10(07-15)

03.1.14, 10:29 AM

Page 9

Adobe PageMaker 6.5J/PPC

Summary of Contents for Plasmavision P42HCA10










































Reviews:

No comments