Fujitsu PagePrinter, User Manual

Page: 77 / 97

Setting up the adapter
PagePrinter Network Adapter: Utilities & Environments 5-11
NetWare
networks
What to do next
Congratulations! Your adapter is ready to work for you.
You have finished setting up the adapter. To make sure you can print to it, you
should test it.
Verifying the adapter setup
To verify that you did everything correctly and that you can print with the
adapter and the utility, do the following:
1 Reset the adapter.
If you need help, follow these steps.
a
From the utility’s adapter list, select the adapter whose setup you want
to verify.
b
On the utility’s menu bar, select Setup/Customized.
c Select Reset Adapter.
2 Check the list of servers under Options to be sure the servers you set up
in the previous step are listed there.
If you need help, follow these
steps:
a
On the utility’s adapter list, select the adapter whose servers you want
to check.
b
From the utility’s menu bar, select Options.
c Select Show Adapter’s Servers.
d
Check the list of network servers. Make sure the server you want the
adapter to work with appears in the list.
•
If you are using PSERVER mode, make sure you selected a file
server to connect with and that you configured queues for that file
server.
•
If you are using RPRINTER mode, make sure you selected a print
server and configured queues.
3 Print a page to a queue. If you need help, follow these steps
:
a
From the utility’s menu bar, select File.
b Select Print.
c
Select To Queue. On the Print List to Queue dialog box, select the file
server, select the queue, and then choose Print Adapter List.
If the page doesn’t print, review this section. Be sure the adapter is
configured properly, is enabled, and that all the queues are set up
correctly. Make sure you are logged into the server.