Operation
Adjusting the brightness and contrast
Call up the
Brightness/Contrast
setting window
Brightness
Set the brightness of the display
With this function you change the brightness of the background lighting.
Contrast
Set the contrast of the display
With this function you modify the contrast of bright colour tones.
Black level
Set the brightness of the display
With this function you modify the contrast of dark colour tones.
Auto Brightness
Automatic brightness control
This function is used to automatically control the brightness of the
background lighting using the light sensor.
On
= The brightness is adjusted according to the ambient brightness
Off
= The brightness is adjusted manually by the user
Auto level
Adjust the signal level
With this function you can automatically set the contrast.
The function is executed with the
button.
If the contrast is set too high, bright surfaces can no longer be distinguished from very
bright surfaces. If the contrast is set too low, the maximum brightness will not be achieved.
Selecting the application mode
Call up the
Mode
setting window
D mode
Setting for DICOM simulation (the values for colour and ACR are locked:
Colour = 7500K, ACR = off)
sRGB
Setting for sRGB (the values for Colour, Contrast and ACR are locked:
Colour = 6500K, Brightness is reduced, Contrast = 50 and ACR = off)
Office
Of
fi
ce presets (the settings for
colour
and
sharpness
can be adjusted)
Photo
Photo presets (
colour
,
sharpness
,
saturation
,
ACR
)
Video
Video presets (
colour
,
sharpness
,
saturation
,
ACR
)
ACR
= Dynamic contrast (on / off)
Fujitsu Technology Solutions
25
Summary of Contents for P24W-6 LED
Page 1: ...Display Operating Manual P24W 6 LED ...
Page 3: ......
