Fujitsu Oracle M10-1, Service Manual

Page: 53 / 254

Msg: ACFAIL occurred (ACS=3)(FEP type = A1)
Date: Oct 20 15:45:31 JST 2012
Code: 00112233-445566778899aabbcc-8899aabbcceeff0011223344
Status: Warning Occurred: Oct 20 15:45:31.000 JST 2012
FRU: /PSU#1
Msg: ACFAIL occurred (ACS=3)(FEP type = A1)
Table 4-4 Operands of the showlogs command and the log to be displayed
Operand Description
error Lists the error log.
event Lists the event log.
power Lists the power log.
env Lists the temperature history.
monitor Lists the monitoring message log.
console Lists the console message log.
ipl Lists the IPL message log.
panic Lists the panic message log.
Table 4-4 shows operands of the showlogs command and the log to be displayed.
Checking the messages output by the predictive self-repairing
tool
Check the messages output from the Oracle Solaris Fault Manager predictive
self-repairing tool, running on Oracle Solaris. Oracle Solaris Fault Manager supports
the following functions:
■
Receives telemetry information about errors.
■
Performs troubleshooting.
■
Disables the FRUs that have experienced errors.
■
Turns on the LED of a FRU that has experienced an error and displays the details
in a system console message.
Table 4-5 lists typical messages that are generated if an error occurs. These messages
indicate that the fault has already been diagnosed. If corrective actions can be taken
by the system, this indicates that they have already been taken. In addition, if the
system is running, corrective actions continue to be applied.
Messages are displayed on the console and are recorded in the /var/adm/messages
file.
Chapter 4 Preparation and Precautions for Maintenance 39