Fujitsu N7100, Operator'S Manual, Page: 391 / 487

7.3 Other Troubleshooting
391
■
Check item
Has the document been loaded correctly?
■
Action
Load the document correctly.
■
Check item
Is the glass dirty?
■
Action
Clean the glass.
■
Check item
Depending on the paper color of the document, scanned data may be
partially cut off because the paper boundary is not recognized correctly.
■
Action
Before scanning, set the paper size to a standard one.
■
Check item
Is the document loaded correctly?
■
Action
Load the document correctly.
■
Check item
Are the side guides aligned with the document width?
■
Action
Align the side guides with the document width.
The brake roller or pick roller may also cause this problem. Refer to "Check item" and "Action" for
" Document is not fed into the scanner (pick error occurs frequently or document feed stops
halfway)." (page 389)
.
Scanned data appears skewed or distorted.
Quality of scanned data is poor.
Scanned data is partially cut off.
Scanned data is skewed.