Fujitsu MHW2060BK - Mobile 60 GB Hard Drive, Maintenance Manual

Page: 255 / 320

5.4 Command Protocol
5.4.3 PIO data-out command protocol
Execution of the following commands involves data transfers from the host system
to the device:
•
WRITE SECTOR (S) (EXT)
• WRITE MULTI (EXT) (FUA EXT)
•
WRITE BUFFER
• WRITE VERIFY
•
SMART WRITE LOG SECTOR
• SECURITY DISABLE PASSWORD
• SECURITY ERASE UNIT
•
SECURITY SET PASSWORD
• SECURITY UNLOCK
•
SET MAX SET PASSWORD
• SET MAX UNLOCK
•
DOWNLOAD MICROCODE
Data of one or more sectors is transferred from the host to the device.
2) If an error remaining in the device prevents command execution, the device
sends the RegDH FIS with 1 set in the I bit.
• WRITE LOG EXT
• DEVICE CONFIGRATION SET
An outline of this protocol is as follows:
1) The device receives a PIO data-out command with the RegHD FIS.
3) When the device is ready to receive data, it sets 0 in the BSY bit and 1 in the
DRQ bit of the Status field of the PIO Setup FIS. At this time, the device sets
0 in the I bit of the Status field of the PIO Setup FIS for a data transfer to the
first sector, while it sets 1 in the I bit for a data transfer to any sector other
than the first sector. Then, it sends this FIS to the host. In the E_Status field,
the device sets 1 in the BSY bit and 0 in the DRQ bit.
C141-E261 5-179