Serial Asynchronous Flash Programming
Chapter 4 GALEP-Programmer
© Fujitsu Microelectronics Europe GmbH
- 21 -
MCU-AN-300012-E-V13
4.1.1
Parallel Programming with GALEP-4 Programmer
The GALEP-4 programmer includes a 40-pin Textool
TM
-socket, for devices with Dual-Inline-
Packages (DIP). For other packages optional adapters are available, e.g.:
Package
GALEP-Adapter
Remark
QFP208 210881
MB91F465D,
MB91F467D
LQPF100 210882
MB91F464A,
MB91F465X
LQFP120 210883
MB91F465K
BGA256 210884 MB91F469G
LQFP64 210889 MB91F463N
LQFP144 210890
MB91F465B,
MB91F467B
LQFP176 210891
MB91F467R
LQFP144 210892
MB91F465C,
MB91F467C
LQFP176 210898
MB91F465P,
MB91F467P
LQFP176 210899
MB91F467S
Table 6: Parallel Programming Adapters
Connect the adapter to the Textool
TM
–socket (take care pin 1 marking), place the MCU in
the adapter and close the adapter’s cover. Start the GALEP32 programmer software and
use ‘Load’ command to load a bin or hex file. Select tab ‘Devices’ and browse to the correct
device, e.g. MCU
Fujitsu
MB91F467D. Choose QFP208 (or correct package) for
parallel programming. In the information window below the correct programming adapter is
listed. Use ‘Select Device!’ button to accept current selection.
Figure 16: GALEP-4 with adapter 210881
