Fujitsu MB2146-09B-E, Operation Manual, Page: 6 / 14

2
4. System Configuration
■
Using the adapter as an emulator system
Connect the adapter between the host computer and the user system so that the adapter can serve as
an emulator under control of the host computer. For using emulator debugger software on the host
computer, refer to the "S
OFTUNE
Workbench OPERATION MANUAL".
Figure 3 shows the system configuration when the adapter is used as an emulator system.
Figure 3 System configuration (emulator system)
■
Using the adapter as a USB programmer
The adapter connects the host computer and the serial interface of MCU with built-in flash memory
made by FUJITSU SEMICONDUCTOR, and writes data in a built-in flash memory.
For information on the USB programmer, contact the their sales or support representative.
Figure 4 shows the system configuration when the adapter is used as a USB programmer.
Figure 4 System configuration (USB programmer)
Host
computer
Adapter
User
interface
connector
Adapter
interface
connector
MCU
User system
*1
*2
*1 : USB cable
*2 : Interface cable (flat cable of the adapter)
Host
computer
Adapter
User
interface
connector
Adapter
interface
connector
MCU with
built-in flash
memory
User system
*1
*2
*1 : USB cable
*2 : Interface cable (flat cable of the adapter)