Fujitsu M3097E, Operator'S Manual

Page: 33 / 56

4 – 6
2 Pull up the ADF paper chute as follows:
• Hold the document cover with one hand and pull up the ADF
paper chute with the other hand to unlock the ADF paper chute.
ADF paper chute
Document cover
3 Fan the documents as follows:
• Take a 15 to 20 mm thickness of documents. Lightly hold both
ends with both hands. Bend the documents into an arch as
shown below.
• Then hold the documents tightly with both hands, and
straighten the documents. The center of documents swell and
air is introduced between the documents.
• Repeat this operation two or three times.
• Turn the documents 90
°
, and repeat the operation again.
15 to 20 mm
Figure 4.3 ADF paper chute setting