Fujitsu LIFEBOOK U7311 Operating Manual Download

Page: 76 / 86

Troubleshooting and tips

The notebook cannot be started

Notebook

Cause

Troubleshooting

The battery is not installed correctly.

►

Check whether the battery is installed
correctly in its compartment.

►

Switch the notebook on.

The battery is dead.

►

Charge the battery.

►

Insert a charged battery.

►

Connect the mains adapter to the
notebook.

The power adapter is not connected correctly.

►

Check whether the mains adapter is
connected correctly to the notebook.

►

Switch the notebook on.

The notebook stops working

Notebook

Energysaving mode

Cause

Troubleshooting

Notebook is in energy saving mode.

►

Leave energy saving mode.

An application programme has caused the
malfunction.

►

Close the application program or restart
the notebook (by restarting the operating
system or switching the device off and back
on again).

The battery is dead.

►

Charge the battery.

►

Insert a charged battery.

►

Connect the mains adapter to the
notebook.

Fujitsu

Summary of Contents for LIFEBOOK U7311























































































Search results

Summary of Contents for LIFEBOOK U7311

Reviews:

Related manuals for LIFEBOOK U7311

Brands by name

Popular brands

Fujitsu LIFEBOOK U7311, Operating Manual

Search results

Summary of Contents for LIFEBOOK U7311

Reviews:

Related manuals for LIFEBOOK U7311

Brands by name

Popular brands