Fujitsu LIFEBOOK U7310 Operating Manual Download

Page: 37 / 94

Working with the notebook

Removing and installing the battery

Only use batteries approved by Fujitsu for your notebook.

Never use force when

tting or removing a battery.

Make sure that no foreign bodies get into the battery connections.

Never store a battery for long periods in the discharged state. This
can make it impossible to recharge.

Removing a battery

►

Prepare for removal, see chapter

"Preparing to remove components", Page 63

HOLD

PULL UP

►

Slide the locking device (1) in the direction of the arrow and hold it in place.

►

Slide the locking device (2) in the direction of the arrow.

►

Grasp the opening (b) and lift the battery out of the battery compartment
in the direction of the arrow (3).

Fujitsu

Summary of Contents for LIFEBOOK U7310































































































Search results

Summary of Contents for LIFEBOOK U7310

Reviews:

Related manuals for LIFEBOOK U7310

Brands by name

Popular brands

Fujitsu LIFEBOOK U7310, Operating Manual

Search results

Summary of Contents for LIFEBOOK U7310

Reviews:

Related manuals for LIFEBOOK U7310

Brands by name

Popular brands