42
- Touchpad/Active Digitizer/Touchscreen
Calibrating the Active Digitizer Display
In order to ensure accurate tracking between the stylus and cursor, you must run the Calibration Utility before you use
the system for the first time, or after you change the display resolution.
To run the calibration utility:
1
Go to Start -> Control Panel.
2
Click Hardware and Sound, then select Tablet PC Settings
3
Under the Display tab, click the [Calibrate] button.(Note: If you have the optional capacitive touchscreen, you will
need to click on either
Pen input
or
Touch input
, depending upon which method you want to calibrate.)
4
Adjust the display of your Tablet PC to a comfortable angle and find the (
+)
symbol in the upper-left corner of the
display.
Dragging
Dragging means moving an item with the stylus by
touching the screen, moving and then lifting the
stylus. To drag, touch the Active Digitizer Display
with your stylus on the item you wish to move. While
continuing to touch the screen with the stylus, drag
the item to its new location by moving the stylus
across the screen, and then lifting the stylus to
release it (Figure 26).
Figure 26. Dragging on the Display
•
T
HE
FIRST
TIME
YOU
PERFORM
A
CALIBRATION
,
THE
SYSTEM
DISPLAY
SHOULD
BE
IN
LANDSCAPE
MODE
. S
UBSEQUENT
CALIBRATIONS
CAN
BE
PERFORMED
IN
LANDSCAPE
OR
PORTRAIT
MODE
.
•
T
HE
FIRST
TIME
YOU
CALIBRATE
,
THERE
WILL
BE
16
CALIBRATION
POINTS
;
SUBSEQUENT
CALIBRATIONS
WILL
REQUIRE
ONLY
FOUR
CALIBRATION
POINTS
.