Fujitsu Lifebook T580 Operating Manual Download

Page: 31 / 123

Working with the notebook

Note the direction of rotation in the following description! No guarantee claims
can be met for damage caused by turning in the wrong direction.

►

Hold the display on both sides as far down as possible and then turn the
display. It turns easily and without resistance.

►

Turn or move the display further until it has turned 180° and the hinge latches in.

You can now close the notebook as usual.

Switching off the notebook

Notebook

►

Close all applications and then shut down the operating system (please
see the "Operating System Manual").

►

Slide the ON/OFF switch towards the right.

The ON/OFF switch returns automatically to its original position.

Fujitsu Technology Solutions

Summary of Contents for Lifebook T580




























































































































Search results

Summary of Contents for Lifebook T580

Reviews:

Related manuals for Lifebook T580

Brands by name

Popular brands

Fujitsu Lifebook T580, Operating Manual

Search results

Summary of Contents for Lifebook T580

Reviews:

Related manuals for Lifebook T580

Brands by name

Popular brands